WIRES

• Building wires are generally used to carry electrical current in almost every industrial, residential, and commercial building.

• The wires, cables and cords rated  300/500V and 450/750V used for electric power, lighting, internal wiring, electric power, domestic, office and similar environments as specified in IEC 60227, BS EN 50525-2-31 (BS 6004), BS EN 50525-2-11 (BS 6500), BS 6231 and BS EN50525-3-41 (BS 7211).
• Based on a special request, PVC insulation rated at 85 °C and 90°C (105 °C for reduced duration) can also be provided.

LOW VOLTAGE CABLES

Low Voltage Cables with PVC and XLPE Insulation, Copper/Aluminium Conductors, Armoured/Un-armoured/Lead Sheathed designs, Single Core and Multi-core Constructions, Fire Retardant Grades, Low Smoke and Zero Halogen Cables, ESMA and BASEC certified products.

CONDUCTORS

Conductors shall be of Copper or Aluminium, circular stranded (Non-compacted or Compacted) or shaped, Class 2 to IEC 60228-BS EN 60228. For smaller sizes, a solid circular conductor, Class 1 as per IEC 60228-BS EN 60228 can also be supplied upon request.

INSULATION

XLPE material and thickness shall be as per IEC 60502/BS 5467/BS 6724 rated for 90ºC continuous operation. PVC insulation Material shall be Type A as per IEC 60502 or TI1 as per BS 7655.

ARMOUR

Galvanised Steel Wires applied helically over bedding as per IEC 60502, BS 5467, BS 6346, BS 6724. (Single core cables shall be with Aluminium wire armour). Cables with Double steel tapes as per IEC 60502 are also available.

OUTER SHEATH

Type ST2 as per IEC 60502, Type 9 as per BS 7655 or LSZH Type ST8/LTS1 coloured Black. Low-voltage cables.

FIRE PERFORMANCE OF CABLE SHEATHS

Cables with special flame-retardant PVC outer sheath to comply with the flame test requirements of IEC 60332-3-22, IEC 60332-3-23, and IEC 60332-3-24 can also be supplied based on special request. Cables as per BS 6724 shall meet the requirements of low corrosive and low toxic gas emission.

MEDIUM VOLTAGE CABLES

• Medium Voltage Cables with XLPE and TR-XLPE Insulation
• Available with Copper or Aluminium conductors
• Metallic Screen of Copper Tape/Copper Wire/Lead Sheath
• Armoured and Un-armoured cable designs
• Single Core and 3-Core constructions
• Fire Retardant cable grades available
• Outer sheath options: PVC, LLDPE, MDPE, and HDPE
• Low Smoke Zero Halogen (LSZH) cable variants
• ESMA and BASEC certified products for quality and compliance

OVERHEAD CONDUCTORS

• Hard Drawn Copper Conductors
• Bare Aluminium Conductors
• Insulated Aluminium Conductors
• Aluminium Alloy Conductors
• Aerial Bundle Cables (ABC)
• ACSR (Aluminium Conductor Steel Reinforced)
• ACSR/AW (Aluminium Conductor Steel Reinforced / Aluminium Clad Steel)
• ACAR (Aluminium Conductor Alloy Reinforced)
• AACSR (Aluminium Alloy Conductor Steel Reinforced)
• AW Conductors (Aluminium Clad Steel Conductors)
• Available in Regular, High Strength, and Extra High Strength conductors

FIRE RESISTANT CABLE

• Cables with Copper Conductors, MICA Tape Primary Insulation, XLPE Secondary Insulation, Armoured/Un-armoured Single and Multicore cables for areas where circuit integrity is of utmost importance and power supply is to be maintained during fire for fire-fighting devices, sprinkler systems, essential fire detection and fire alarm systems, evacuation systems for safeguarding human life and protecting equipment.