Cable Tie

• The cable ties ensure a secure hold of the items to be wrapped, thanks to the teeth on the belt and the self-locking system.

• It used to bundle wires, cables, wrapping and get gardening neat and tidy.

• You can enter manually or with a tool

• The end of the tape is slightly bent for insertion allows practical.

• UL approved Nylon 66, 94V-2, With good tensile strength and insulation, not easy to get aging.

• Standard colour is natural, black and white.

• Various sizes are available from 100mm to 1168mm.

Wiring Duct

• High impact, warp-proof PVC, self-extinguishing, UL approved 94V-0

• Available in Grey Color.

• Test to UL file E156597 to 50℃

• These devices are for routing of wires within devices in factory installations.

• Features parallel holes on both sidewalls to facilitate cutting in wire application.

• Various sizes available from (WxH) 15x25mm to 120x80mm.

• Length of the wiring duct is 2mtr.

GM CABLE MARKER

• Made of finest soft grade, strong, durable PVC that will resist oil, grease, acid abrasion and chemicals.

• With its unique oval shape design provide slip over cable directly (for small cable) slip onto marker strip (for larger cable or cable bundles)

MARKER STRIPS

• Made of finest soft grade, strong, durable PVC that will resist oil, grease, acid abrasion and chemicals.

• With cable tie fastening hole to accommodate marker pieces for easy identification of cable runs.

SPIRAL BINDING (INSULATING)

• A economical way of cable binding. Easily applied to electric harness cables and wire bundles. Cut-to-fit versatility in convenient roll-form.

• Made from PE material or NYLON6. Excellent in insulation and binding strength.

• Flexible construction enable bands to follow wire ways easily.

• Durable, reusable with retained spiral strength.

• Fix ends of band with BANDEX cable ties and spiral wire bundles in clockwise direction to complete works.

• Expand spiral range almost without limit.

• Available in white colour, 10mtr Roll.

HEAT SHRINK (INSULATING)

• Rigid Shrinkable PVC Material.

• Used for colour distinction and insulation of busbar in control panel. To be shrinked by blower or hot water.

• Maximum service temp: 80°C

• Available in Red white Blue and Black, 100mtr Roll.

CABLE CLAMPS

• Self-Adhesive Tie Mount
• UL approved material NYLON 66, 94V-2 (Backed with adhesive tape) .
• SELF-ADHESIVE TIE MOUNTS is designed to support light weigh wire bundles when properly applied on any clean, smooth, grease free surface. For heavy support mounting hole is provided for screws.
• To apply, simply peel off backing paper and apply mount to surface after that, cable ties can be inserted to secure wire bundles.
• Available in Black & White.

SUPREME-METRIC GLAND IP68

• UL approved Material Nylon 66, 94V-2.
• Suit a variety of applications, and diverse industries.
• Mount gland to pre-drilled panel hole, use locknut to fix gland on board, insert the cables in the seal, and then tighten up the nut to hold cables in position.
• Simply and quickly fixed, high degree of the protection IP68 preventing dust and water.

SUPREME PG GLAND IP68

• UL approved material NYLON 66, 94V-2.
• Well designed for insulation, waterproof and impact resistant. Used extensively for protection and fixation of cables in control panel and apparatus.
• Mount body to pre-drilled panel hole and fix it with locking nut.
• Insert cables through body and then seals consequently. Finally, Press them together with press nut to hold cable in position.

SPLIT FLEXIBLE CONDUITS

• Material: PP(BLACK)
• All sizes in mm unless otherwise stated.
• ID or OD can vary ± 0.4 mm
• Manufactured from P.P. (Black)
• Used to protect wiring inside the wall to replace normal PVC pipe. Flexible design for better wire running.

GROMMET (OPEN/CLOSED)-BUSHINGS

• Low cost protection for wires and cables passing through metal panels
• Quick and easy to install
• Closed hole versions available for later insertion of cables or wires
• PVC material Available in Black Colour.

CABLE CLIPS (ROUND)

• High Density PE material, Masonry steel nail.

• Applied for general round cables.

• Applied for telephone cords with nails inserted.

CORD END TERMINALS

• Terminal Material – Copper
• Insulation Material – Nylon

SPADE(FORK) TERMINALS

• Terminal Material – Copper
• Insulation Material – Vinyl

RING TERMINAL

• Terminal Material – Copper
• Insulation Material – Vinyl