Cable Tie

• The cable ties ensure a secure hold of the items to be wrapped, thanks to the teeth on the belt and the self-locking system.

• It used to bundle wires, cables, wrapping and get gardening neat and tidy.

• You can enter manually or with a tool

• The end of the tape is slightly bent for insertion allows practical.

• UL approved Nylon 66, 94V-2, With good tensile strength and insulation, not easy to get aging.

• Standard colour is natural, black and white.

• Various sizes are available from 100mm to 1168mm.

Wiring Duct

• High impact, warp-proof PVC, self-extinguishing, UL approved 94V-0

• Available in Grey Color.

• Test to UL file E156597 to 50℃

• These devices are for routing of wires within devices in factory installations.

• Features parallel holes on both sidewalls to facilitate cutting in wire application.

• Various sizes available from (WxH) 15x25mm to 120x80mm.

• Length of the wiring duct is 2mtr.

BM CABLE MARKER

• Made of finest soft grade, strong, durable PVC that will resist oil, grease, acid abrasion and chemicals.

• Features high quality flexible interior to fit various cable diameters. The markers stay attached on a roller and can be dispatched easily when needed. Bold print on yellow body to show the codes precisely. Any numbers can be composed by arranging letters and numbers in sequence to provide the necessary codes. To be fitted before the terminal is attached or solder connection made and grip cable firmly in position.

GM CABLE MARKER

• Made of finest soft grade, strong, durable PVC that will resist oil, grease, acid abrasion and chemicals.

• With its unique oval shape design provide slip over cable directly (for small cable) slip onto marker strip (for larger cable or cable bundles)

MARKER STRIPS

• Made of finest soft grade, strong, durable PVC that will resist oil, grease, acid abrasion and chemicals.

• With cable tie fastening hole to accommodate marker pieces for easy identification of cable runs.

SPIRAL BINDING (INSULATING)

• A economical way of cable binding. Easily applied to electric harness cables and wire bundles. Cut-to-fit versatility in convenient roll-form.

• Made from PE material or NYLON6. Excellent in insulation and binding strength.

• Flexible construction enable bands to follow wire ways easily.

• Durable, reusable with retained spiral strength.

• Fix ends of band with BANDEX cable ties and spiral wire bundles in clockwise direction to complete works.

• Expand spiral range almost without limit.

• Available in white colour, 10mtr Roll.

HEAT SHRINK (INSULATING)

• Rigid Shrinkable PVC Material.

• Used for colour distinction and insulation of busbar in control panel. To be shrinked by blower or hot water.

• Maximum service temp: 80°C

• Available in Red white Blue and Black, 100mtr Roll.

CABLE CLAMPS

• Self-Adhesive Tie Mount
• UL approved material NYLON 66, 94V-2 (Backed with adhesive tape) .
• SELF-ADHESIVE TIE MOUNTS is designed to support light weigh wire bundles when properly applied on any clean, smooth, grease free surface. For heavy support mounting hole is provided for screws.
• To apply, simply peel off backing paper and apply mount to surface after that, cable ties can be inserted to secure wire bundles.
• Available in Black & White.

SUPREME-METRIC GLAND IP68

• UL approved Material Nylon 66, 94V-2.
• Suit a variety of applications, and diverse industries.
• Mount gland to pre-drilled panel hole, use locknut to fix gland on board, insert the cables in the seal, and then tighten up the nut to hold cables in position.
• Simply and quickly fixed, high degree of the protection IP68 preventing dust and water.

SPLIT FLEXIBLE CONDUITS

• Material: PP(BLACK)
• All sizes in mm unless otherwise stated.
• ID or OD can vary ± 0.4 mm
• Manufactured from P.P. (Black)
• Used to protect wiring inside the wall to replace normal PVC pipe. Flexible design for better wire running.

GROMMET (OPEN/CLOSED)-BUSHINGS

• Low cost protection for wires and cables passing through metal panels
• Quick and easy to install
• Closed hole versions available for later insertion of cables or wires
• PVC material Available in Black Colour.

CABLE CLIPS (ROUND)

• High Density PE material, Masonry steel nail.

• Applied for general round cables.

• Applied for telephone cords with nails inserted.

CORD END TERMINALS

• Terminal Material – Copper
• Insulation Material – Nylon

SPADE(FORK) TERMINALS

• Terminal Material – Copper
• Insulation Material – Vinyl

RING TERMINAL

• Terminal Material – Copper
• Insulation Material – Vinyl